Automotive Cost effective Multimedia 32bit Dual core Application Processor w/ AEC-Q100 certified

NXP3220A: AEC-Q100 certified, 32bit Dual-Core, High Performance, Advanced 3D Graphics, Full-HD Multimedia Video decoder, ARM® Cortex®-A7 Core


NXP3220A is a system-on-a-chip (SoC) based on the 32-bit RISC processor for Automotive application (AEC-Q100 certifile), Designed with the 28 nm low power process, features of NXP3220A include:
•  Cortex-A7 Dual core CPU
•  Highest memory bandwidth
•  Full HD display
•  1080p 60 frame video decodinghardware
•  3D graphics hardware
•  High-speed interfaces such as eMMC4.5 and USB 2.0 
NXP3220A uses the Cortex-A7 dual core. It provides 6.4 GB/s memory bandwidth for heavy traffic operations such as 1080p video decoding, 3D graphics display and high resolution image signal processing with Full HD display. The application processor supports dynamic virtual address mapping, which helps software engineers to fully utilize the memory resources with ease.
NXP3220A provides the best 3D graphics performance with wide range of APIs, such as OpenGL ES 2.0.Superior 3D performance fully supports Full HD display.The native display, in particular, supports Full HD resolution of a main LCD display. Separate post processing pipeline enables NXP3220A to make a real display scenario.

NXP3220A Block diagram

•  Cortex-A7 Dual Core @ 1.2Ghz w/ 32Kbyte I-Cache, 32Kbyte D-Cache per core
•  256KByte L2 Cache
•  VFP(Vector float-point Processor), Neon Processor per core

System Controller
•  32 channels DMA, Interrupt Controller
•  Clock & Power management for Normal, Idle, Stop and suspend to RAM (Deep Sleep)
•  4 channels Timer/Watchdog Timer
•  RTC

Memory/Storage Controller
•  System Memory : Supports LPDDR3/4 and DDR3/4
•  SRAM, ROM and NOR flash controller
•  SLC/MLC NAND Flash Controller w/ up to 60bit ECC
•  Supports 2 independent SD/MMC/eMMC controller

FHD Multi-format video codec
•  FHD Multi-format video decoder

3D Graphic
•  Enhanced 3D graphic processor
•  Supports OpenGL|ES 2.0 and OpenCL

Display Controller & Video Post-processor
•  Supports display up to 2 separate devices 1920x1280@60hz
•  Supports 24bit RGB, i80 I/F and LVDS
•  Supports 3D De-interlace, Fine video scalar and Color space converter

Video Input Processor
•  Supports x2 8bit BT656/601 format

•  Supports Gigabit Ethernet MAC w/ AVB
•  Supports 2x USB 2.0 Host and USB 2.0 OTG

•  5x UART, 2x SPI, PPM, 5x I2C, 2x PWM, 1x MPEG-TS
•  2x CAN I/F
•  3x I2S, SPDIF Rx/Tx, 2x PDM for glueless interface w/ Digital MIC
•  8x 12bit general purpose ADC

•  ARM TrustZone : TZPC, TZASC and TZMA
•  Hardware crypto accelerator : PKA, RSA, DES/TDES, AES, SHA, MD5 and PRNG
•  Supports Secure boot and Secure JTAG

AEC-Q100 certified

•  17x17mm body size, 0.65mm pitch, TBD